Time Change - Panasonic DBS Telephone System

The date and time display on all Panasonic extensions must be set from an attendant phone. The current date and time are displayed on the LCD by pressing the telephone "On/Off" key. At this point, the phone will issue intercom dial tone.

To enter the programming mode:

Press the "Prog" key
An "F" will appear on the display
Dial "##"
"Program Mode" appears on the first line of your display;
"Main Mode" appears on the second line of display
press the "FF1" key (which is the first button on the button row of keys)
"Select Sub Mode" appears on the second line of the display
Dial "1#"
"1:DATE 2:TIME" appears
Dial "1#"
"MONTH/DAY/YEAR" appears
Enter two digits for the month, two digits for the day, two digits for the year (example: 01/01/00)
Press "#"
"Time Set Mode" appears on the display
Enter four digits four hours and minutes (must be military/24-hour time, example: 10:00 a.m. enter 1000)
Press " #"
Press the "On/Off" key to turn phone off.
The new date and time appear on the display.

Change Time - Panasonic KXT Series Telephone System

Setting the time must be completed from an LCD Display phone at Extension 11, using the telephone keypad. This system type requires "Easa-phone" series or a 7000 series model telephone (the model number is listed on the bottom of the phone) that has one or more small switches located at the rear of the phone. Digital "XDP" phones can not be used on this system type!

To set the time:

Lift the handset or press "SP-Phone" button on Extension 11.
Dial "77"
Enter the hour with 2 digits. (01 through 12)
Enter the minute with 2 digits. (00 through 59)
Dial (0) for AM or (1) for PM.
Press the "#"
Wait for confirmation tone. (Instantly after pressing the # button, new time counting will start).

Time Change - Panasonic KXTA Analog Hybrid Series Telephone System

Setting the date and time must be completed from an LCD Display Attendant phone, using the telephone keypad. This system type requires a 70xx or 77xx series model telephone (the model number is listed on the bottom of the phone) that has one or more small switches located at the rear of the phone. Digital "XDP" phones can not be used on this system type!

If using a 70xx series phone, begin programming by first moving the Memory switch at the rear of the telephone to the "program" position. If using a 77xx series phone, begin programming by first pressing the Program button.

To select "user" system programming, enter "*#1234"

· To select "Time and Date" programming mode, enter "000"

· Press the "SP-PHONE" button. An example LCD display will be:

'01 Jan. 1 FRI

· To change the year entry, press the "TRANSFER" button to clear the current entry, and enter the new year in 2-digit format.

· Press the "CFW/DND" button to proceed to the month setting. Keep pressing the "AUTO ANSWER" button until the desired month is displayed.

· Press the "CFW/DND" button to proceed to the date setting. To change the current entry, press the "TRANSFER" button and enter the new date - number be from 1 to 31.

· Press the "CFW/DND" button to proceed to the day-of-week setting. Keep pressing the "AUTO/ANSWER" button until the desired day of the week is displayed.

· Press the "AUTO DIAL" and then "SP-PHONE" buttons to store the date setting and to proceed to the time settings. And example display will be:

12:00 PM 24

· To change the hour, press the "TRANSFER" button and enter the new hour - number must be from 1 to 12.

· Press the "CFW/DND" button to proceed to the minute setting. To change the current entry, press the "TRANSFER" button and enter the new minute - number must be from 1 to 59.

· Press the "CFW/DND" to proceed to the AM/PM setting. Press "AUTO/ANSWER" to select AM or PM.

· Press the "AUTO DIAL" and then the "HOLD" buttons to store the time settings.

To end the programming, if using a 70xx series phone move the Memory switch at the rear of the telephone back to the "set" position. If using a 77xx series phone, simply pick up and replace the handset.

Time Change - Panasonic KXTD Digital Super Hybrid Series Telephone System

Setting the date and time must be completed from an LCD Display Attendant phone, using the telephone keypad. This system type typically uses digital "XDP" model telephones (the model number is listed on the bottom of the phone), but can also utilize the 7000 series phones. The following procedure assumes use of an "XDP" Attendant telephone.

To select "user" system programming, press the PROGRAM button and then enter "**1234"