Meridian Norstar Information

Scroll down for Speed dials and Names

 

Setting System Time and Date

 

 

1. Place the programming overlay on any M7310, M7324, T7316 or T7324 telephone

2. Dial FEATURE **23646. The display reads Password

3. Dial 23646 again. The display reads 1. Sys Speed Dial

4. Press NEXT until display reads 3. Time and date

5. Press SHOW. The display reads Time

6. Press CHANGE. The display reads Hour If you dont need to change the hour skip to step 9

7. Press CHANGE

8. Enter the hour in 2 digit form, either 12 or 24 hour clock

9. Press NEXT. The display shows Minutes If you dont want to change the minutes skip to step 12

10. Press CHANGE

11. Enter the minutes

12. Press NEXT

13. If hour was less than 12 display reads AM or PM if not skip to step 15

14. Press CHANGE to select AM or PM

15.  Press RLS to exit or NEXT to continue programming

1.   Place the programming overlay on any M7310 or M7324 telephone

2.   Dial   FEATURE **23646.      The display reads Password

3.   Dial 23646 again.      The display reads 1. Sys Speed Dial

4.   Press NEXT until display reads 2. Names

5.  Press SHOW.  The display reads Extn names 

6.   Press SHOW.    the display reads  Show extn#:

7.   Enter the extension number. The display shows the current name

8.   Press  CHANGE

(soft key below display)

9.   Enter the characters of the name using dial keypad e.g  for f press 3 three times etc

10. Press RLS to exit or NEXT to continue programming

11. To change line names as above, after stage 5 press NEXT until display reads  Line names  

NAMES

System Speed Dials                                                

                                                                                   

Dial **23646                                                                  

Dial    23646                                                         

                                                                     

System Displays         Config                                                         

Press NEXT 3 Times.         .                                                          

System Displays         Sys Speed Dial                                                   

Press SHOW.                                                     

System Displays         Speed Dial #: ___                                                        

Enter Speed Dial number to add.        .                            

* Starts with 01.           

System Displays         Speed Dial # 01                                                           

Press SHOW.    Show                                                          

System Displays         O1: (# or No Number)                                      

                                                                     

Enter in Phone Number (remember to add '9' if you have to use it to dial out).         

Press NEXT.                                                                 

System Displays         Use Prime Line                                                   

Press CHANGE to      select alternative line groups etc                                      

System Displays Display Digits: Y

Change to N if you want to name speed dials

System Displays Bypass Restr'n: N  

Hit Release to end.